Forgings and Pressings

KRANEKS GROUP'S die forging operations produce forgings and pressings from all steel grades and of various configurations intended for hot working.

Forgings:

• Weight up to 500 kg;
• Diameter up to 700 mm;
• Type: rectangles, bars, cylinders, rings, reeling rings, gears, shafts, plates etc.

Pressings:

• Weight up to 50 kg;
• Diameter up to 400 mm;
• Type: semispherical, flat, rectangular, round etc.

The installed equipment is characterised by high output, enabling forgings and pressings to be produced with a high degree of accuracy, most closely approximating to the finished products in shape and size. Blanks are produced using 1600 - 4000 ton-force crank forging presses from Sumitomo or Kuritomo, Japan, and 0.25, 0.4, 0.75, 1 or 3 ton hammers. The company has its own tooling section for producing dies, enabling equipment to be rapidly adjusted for customised production.

High quality forgings and castings are ensured by strict observance of production process requirements and control of manufacturing specifications. All finished products are subjected to various non-destructive tests according to standards agreed with the customer.

Forgings and pressings may be made in sizes differing from the above, following technical clarification by our die forging staff.