Construction buckets

• Developed for standard excavator models.

• Intended for earthmoving work in light soils.

• Highly resistant to abrasive ground constituent materials.

• Bucket bottom and side plates are made of wear-resistant materials.

• Side cutters are bolted on to the side stiffening rib.

• Developed for standard excavator models.

• Intended for earthmoving work in heavy soils (clay, soft rock etc.).

• Side plates and bottom edges are reinforced and abrasion resistant.

• Side plate reinforced in its upper part with additional abrasion resistant strip.

• Intended for firm ground and rocky areas.

• Ideal for digging and loading rocky and frozen soils.

• Practical upper tooth slope (angle).

• Super-tough horizontal cutting edge from abrasion resistant steel.

• Additional reinforcement for upper part of side plate and cutting edges.

• Intended for work in rocky soils (quarries, mountain areas, northern regions etc.).

• Effectively crushes, splits and loosens rocky and frozen soils.

• Features extra-sharp and robust tips.

• Middle tooth projects forward on bucket’s middle stiffening, permitting its use to crush and dig up soil without damaging the structure.

• High wear resistance is achieved by using BHN400 in critical bucket areas.

• Bucket bottom and side plates are reinforced with thick wear resistant steel strips.

• Intended for use in light and soft soils.

• Ideally suited for clearing ditches, channels and water drains. For these purposes, the bottom and side plates are provided with drainage holes.

• Particularly effective in operation along inclines, slopes, embankments etc. (soil compaction and levelling).

• Made from wear resistant materials, including extra-wear resistant steel for stiffening ribs and cutting edges.

• Sufficiently robust design due to internal stiffening rib.

• As an option, we offer an additional bolt on reinforcing plate.

Последние 25 лет на ряду с гидравлическими гусеничными экскаваторами Машиностроительная группа КРАНЭКС производит строительные ковши всех видов и форм. Только в этом веке группой изготовлено более 3000 ковшей объемом от 1 до 3 м³.

КРАНЭКС имеет 20-летний опыт сотрудничества с японской фирмой KOMATSU в рамках Совместного Предприятия, в результате которого инженеры и менеджеры КРАНЭКС имеют уникальные для России компетенции в проектировании и производстве компонентов и рабочего оборудования для строительной и карьерной техники.

Наши специалисты готовы, принимая во внимание особенности условий эксплуатации вашей техники, разработать оптимальный вариант конструкции и комплектации карьерного ковша, максимально отвечающего именно вашим требованиям.

Мы производим постоянный мониторинг и гарантийное обслуживание поставляемых ковшей.

Certification

KRANEKS is one of only a few Russian companies with which SSAB Oxelȍsund AB has signed an agreement concerning the HARDOX In My Body trademark.

Each bucket designed and made at KRANEKS Machinery Group has its own HARDOX In My Body label with an 8-digit identification number confirming that all KRANEKS bucket wear parts are made from HARDOX steel.

KRANEKS Company’s management system, from design to servicing, is certified according to ISO 9001:2000 quality management system.

All our products are certified for conformity.

Production process

Bucket parts are cut at our KRANEKS-KOMATSU joint venture, using modern high-tech equipment to ensure high quality all cutting work.

Advanced welding techniques and the latest equipment ensure high weld strength characteristics.

Bucket components are welded using Esab materials and Kemppi semi-automatic welding machines with shielding gas comprising argon (80%) and carbon dioxide (20%).

Ultrasonic weld inspection precludes any weld defects.

All stages of production are supervised by engineers who have undergone training at plants in Japan and Europe.

Buckets are manufactured using steel from SSAB and Severstal, possessing enhanced strength and wear resistance.

• 

  Скальный сверхусиленный ковш к Cat 349

• 

  Ковш скальный

• 

  Ковш усиленный для EK 270LC

• 

  Скальный ковш к DOOSAN

• 

  Ковш-рыхлитель к PC 300